Anchorage Devices with Mechanical Fastening
UNE EN 795/96 CLASS A1
In those unforeseen situations where you need to install an anchorage device and have no alternative but to use mechanical or expansion fastenings ("metal anchors"), consider the application of our TAC50 Series of anchors of different lengths to which the worker can attach directly. The TAC50 series is certified according to UNE EN-795/96 Class A1 including the anchor, so you don't need to estimate it yourself or take responsibility for it.
The anchor bolt must always be installed according to the manufacturer's rigorous instructions (tightening torque, punching, distance to edge, etc.) to obtain the required strength. On the fastening, screw the eye bolt all the way in and tighten until it cannot be loosened.
Anchoring device compliant with UNE EN 795/1996, A1, A2.
Encapsulated anchoring loop for mounting on the structure. Steel ring for attaching harness...
Individual protection system for formwork systems that allows for the safe placement of system...
Anchoring Devices for Rocks. Series of anchoring devices using wedging, specifically designed...
Ideal for Civil Works for work on SLOPES and similar situations.
Anchoring device that provides numerous and different attachment points to secure a fall...
It can be installed at any point on the railtrack with simple manipulation in less than 30...
Ideal for Civil Works for work on SLOPES and similar situations.
Anchoring device capable of being temporarily installed on a wide range of standardized steel...
Anchoring devices for fall arrest systems and structural anchors for lifelines using our...
Anchorage Devices with Mechanical Fastening
