Edge Protection Post for inclined surfaces. Especially suitable for rehabilitation, restoration, and renovation works on roofs and roofs with eaves where it is necessary to overcome gutters.
The lower support of the baseboard is sliding to adapt to any size with respect to the installation.
The plate at the top is fixed to the sloping roof and the bottom part rests on the facade without damaging it, surpassing the gutter.
Certified according to regulations: EN 13374:2019 A.
Base for fixing the post to stairs or landings. Gap of 10cm. If the gap is smaller, the...
New clamp with jaw. At the bottom with a plate that allows its mounting on concrete stairs....
Wall and wall fixation clamp to allow the system to be attached to elevator shafts or openings...
Fixing clamp with an opening of up to 48cm. It can be easily secured with a hammer.
...
Post for the installation of an edge protection system in accordance with EN 13374 class A....
Steel claw that allows the perimeter protection system to be attached to H20 steel beams. No...
Positionable handrail. Its patented clamp opening system allows for quick and easy...
NEW Universal post for attachment to wooden beams. Allows for front or side fixation.
...
Fixed support for mounting on facade or vertical surfaces.
Projection:...
Fixed support for installation on narrow-edge beams.
Projection: 300...
2.5 meter long standard railing, top/middle railing for edge protection systems.
Made...
Basic post of the system. With the Regulator (B-1951506), the installation height of the fence...
Bracket for joining two beams with the wall. Diameter: 55cm
2.0kg
Base for vertical installation of posts in edge protection. Allows mounting on vertical...
Edge Protection Post for inclined surfaces. Especially suitable for rehabilitation, restoration, and renovation works on roofs and roofs with eaves where it is necessary to overcome gutters.
The lower support of the baseboard is sliding to adapt to any size with respect to the installation.
The plate at the top is fixed to the sloping roof and the bottom part rests on the facade without damaging it, surpassing the gutter.
Certified according to regulations: EN 13374:2019 A.
