![Universal cornice fixing post Universal cornice fixing post](https://systemasafety.com/124-large_default/poste-cornisas-b-27100r1.jpg)
- New
The handrail is tiltable with respect to the base to adjust it to the position closest to vertical (and in any case within the deviation of ± 15 ° allowed by EN 13374 standard).
The railing post has been constructed and certified for use as temporary fall protection during construction, maintenance, or renovation work. It allows work in industrial or residential buildings on balconies, terraces, stairs, and concrete roofs (maximum inclination of 30o).
Attachment to the structure is done using screws. Through a sliding system, the position of the edge protection is adjusted to the exact required distance.
Certified according to regulations: UNE 13374:2019 A and B.
Note: It can replace the previous model of post B-27100.
Base for installing the system on the ground for enclosing loading openings, gaps, or...
Basic post of the system. With the Regulator (B-1951506), the installation height of the fence...
New clamp with jaw. At the bottom with a plate that allows its mounting on concrete stairs....
Steel claw that allows the perimeter protection system to be attached to H20 steel beams. No...
Container for 25 barriers that allows for their optimal transportation and storage.
116...
This regulator allows for easy adjustment of the installation height of the metal fence. This...
Fixing clamp with an opening of up to 48cm. It can be easily secured with a hammer.
...New adjustable roof post with facade fixation. Features a positionable, tiltable handrail that...
The handrail is tiltable with respect to the base to adjust it to the position closest to vertical (and in any case within the deviation of ± 15 ° allowed by EN 13374 standard).
The railing post has been constructed and certified for use as temporary fall protection during construction, maintenance, or renovation work. It allows work in industrial or residential buildings on balconies, terraces, stairs, and concrete roofs (maximum inclination of 30o).
Attachment to the structure is done using screws. Through a sliding system, the position of the edge protection is adjusted to the exact required distance.
Certified according to regulations: UNE 13374:2019 A and B.