In order to protect horizontal and vertical surfaces from falling dirt, construction materials, or rubble, we supply a wide range of debris nets.
Rubble nets are much stronger than mosquito nets and all our nets are UV treated to ensure a long-life span. Depending on the specific project, nets with larger or smaller mesh sizes can be used. The usual mesh size for these nets is 2cm, 2.5cm, 3cm or 4.5cm.
We manufacture in Spain and we can produce any size and shape, and also join several types of nets to achieve the highest level of security on site. We adapt to your needs.
To prevent the fall of rubble and construction materials during rehabilitation and renovation work, vertical or horizontal nets with a 60mm or 45mm mesh are often installed. Optionally with sewn mosquito net. We offer a wide range of safety nets custom-made in high-tenacity polyamide with knot or high-tenacity polypropylene without knot, always with anti-UV treatment to guarantee the durability and resistance of nets.
The nets for the prevention of falling rubble are always made to measure. Below you will find the netting panels that are usually in stock and can be adapted to your project, no matter the size or quantity. We can manufacture the netting in special shapes.
The nets are always square finished and always rounded with a reinforced edge for a clean finish and extra strength.
Depending on the project it can be interesting to combine an anti-fall safety net with these anti-drop nets or if dust or small debris will also fall on the construction site, it can be interesting to combine it with a sewn mosquito mesh net.
In the construction site canopies with nets, in horizontal trays, in our RAND/RAND PLUS system or in traditional edge protections of construction site railings, debris nets can be included as an additional protection measure for pedestrians and workers on construction sites.
For façade protection nets we recommend our 100mm mesh safety net with sewn-in mosquito mesh. See product.
If the netting is to be fixed to a metal system, we recommend the use of 15kn. certified safety ropes, certified according to EN 1263-1. If the net is to be fixed directly to the facade, we have pigtail hooks with expanding plugs, which are perfect for this purpose and allow the net to be hooked into the open spiral. You can also use closed hooks with carabiners, e.g. COLs. Textile straps are a good alternative to ropes, which can be tightened with a ratchet to prevent a gap between the facade and the net.
Please do not hesitate to contact us if you have any questions or requirements.
Walkable nets used horizontally for protecting height openings.
High-tenacity polyester textile straps with ratchet tensioner used for tensioning safety...
Safety net secured to consoles for horizontal use (Tray net).
Protection net with perimeter rope of 30KN, designed to cover horizontal gaps.
Tailor-made flexible nets made of steel wire rope with dozens of...
In order to protect horizontal and vertical surfaces from falling dirt, construction...
Nets used for vertical enclosures of buildings, from floor slab to floor slab.
Nets for preventing materials at construction sites from falling. Complete...
Protect your construction site against cold, wind, rain, sun or...
Safety net with perimeter rope attached to a bracket-type support
The safety net under the slab is a collective protection measure that limits the fall of...
In order to protect horizontal and vertical surfaces from falling dirt, construction materials, or rubble, we supply a wide range of debris nets.
Rubble nets are much stronger than mosquito nets and all our nets are UV treated to ensure a long-life span. Depending on the specific project, nets with larger or smaller mesh sizes can be used. The usual mesh size for these nets is 2cm, 2.5cm, 3cm or 4.5cm.
We manufacture in Spain and we can produce any size and shape, and also join several types of nets to achieve the highest level of security on site. We adapt to your needs.
