Steel Mesh Barrier
Temporary Edge Protection System. This product is both lightweight and extremely robust. Each welding point withstands a load of up to 500 kg. The steel barrier replaces the classic 3-part edge protection as it is handrail and toe board at the same time. With its lightweight of less than 20 kg it is a versatilely applicable, quickly mountable system with an excellent product quality due to state-of-the-art production methods. It is adjustable in height and offers protection by its double edges. A wide range of attachments can be delivered.
Barrier system in accordance to BS EN 13374 CLASS A
B-19xxxx
Barriers
B-1921311
130 x 115 cm, 11kg, powder-coated
B-1922311
230 x 115 cm, 16,8kg,powder-coated
B-1922611
2600 x 115 cm, 19,8kg, powder-coated
Posts
B-1951500 / B-1951500B
150 cm, 2,9-3,12kg
This Post has been developed for permanent application with the barrier. The adjustable-in-height Slider allows the barrier to be adjusted to the favoured height (B-1951506).
B-1951195
119,5 cm, 3,2kg
This TCT Post has been developed for permanent application with the barrier or with a three part wooden edge protection. Additionally available with toe board holder (B-19511951).
B-1951500B + regulador B-19515004
150 cm, 2,9kg, 2,4kg
The Scandic allows the acceptance of the barrier ore the threepart wooden edge protection in different thicknesses.
B-1950016
150 cm, 3,6kg
French posts. Allows usage from both sides.
Attachments
B-1950001
1,42 kg
The Standard Foot is applicable for assembly to all flat levels, ideally on slab edges. Its four supporting points at the bottom side of the Foot allow a very fast and simple assembly. By its design, the Foot is both long-lasting and applicatory in handling. It can be fastened to concrete and brickwork by means of different screws and plugs.
B-1951001
1,1kg
The Eco Foot is a cost effective product, applicable to all flat levels. By its design, the foot is both long-lasting and applicatory in handling. It can be fastened to concrete, wood and steel by means of different screws and plugs.
B-1950013
3,24 kg
The Ground Base allows the barrier to be applied as shut-off device. It is used to effectively close off hazard areas, e.g. loading of the adequate drill holes, it can be additionally secured against shifting.
B-195005
1,9 kg
The Edge Foot allows the safe assembly to stair stringers and other vertical levels. The bearing-out of the posts amounts to 10 cm.
B-1950003
5,1kg
Versatilely applicable and very robust. This Clamp allows clamp width of up to 48 cm. The welded-on DW 15 threads allows an easy fixation with a hammer.
B-1952003
6,4kg
Versatile applicable and extremely robust: This HD (Heavy Duty) Clamp allows widths from 5 mm to 450 mm. The product is designed to last for years on sites. The all new designed thread is possibly the best you can buy for money.
B-1951016
2,0kg
This products connects two beams with the wall. Width 55mm.
B-1951005
2,4kg
This products connects two beams with the wall. Width 82mm.
B-1950015
2,0kg
The Shaftfix allows a save fastening of barriers to wall openings e.g. such as lift shafts – without drilling.
B-1950009
3,9kg
The Steelweb allows a movable fastening oft the edge protection of up to 35 cm.
B-19515006
0,21kg
The Post slider allows variable height adjustability of the steel barrier. Always delivered with the B-1951500B.
B-1951003
4,15kg
This new product is designed to connect H20 beams with our posts/barriers. No tools needed. Works with 40 mm H20 beams. On request available for 60 mm H20 beams as well.
B-1950011
0,05kg
Plastic cast for insertion in site-mixed concrete. 150 units/sac.
B-1950023
1,32kg
Attachment for walls or balconies.
B-1951000
0,03kg
Cast Sleeve. 50 units/box.
Barrier Frames for Storage and Transport
B-1951016
116 x 79 x 130 cm, 60kg
25 barriers can be stored upright and be safely transported in the Barrier Frame 25. Two Barrier Frames 25 can be stacked on top of each other.
B-192007
121 x 121 x 129 cm, 88kg
In the TAMMET Barrier Frame 60, 60 barriers can be stapled diagonally and be safely transported.
